Axis 247S Instrukcja Użytkownika Pobierz pdf (Strona 30)

AXIS 247S - System Options

Resetting to the Factory Default Settings

To reset the Video Server to the original default settings, go to the System Options > Maintenance web page

(described in

Maintenance, on page 28) or use the control button on the Video Server, as described below:

Using the Control Button

Follow the instructions below to reset the Video Server to the factory default settings using the Control Button.

1. Switch off the Video Server by disconnecting

power.

2. Press and hold the Control Button while

reconnecting the power.

3. Keep the Control button pressed until the Status

Indicator displays yellow (this may take up to 15

seconds).

4. Release the Control Button.

5. When the Status Indicator changes to Green (may

take up to 1 minute), the process is complete and the Video Server has been reset.

6. Re-install the Video Server, as described in the Installation Guide.

Control Button

Status Indicator

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Brak uwag

Axis 247S Instrukcja Użytkownika Strona 30