Axis 1620 Instrukcja Użytkownika Pobierz pdf (Strona 144)

UNIX

Windows

OS/2

Macintosh

Appendix A: Test Button AXIS 1620 User’s Manual

144

NetWare

Factory Default

Settings

Follow the instructions below to reset the AXIS 1620 to the factory

default settings:

1. Remove the external power supply to switch off the AXIS 1620.

2. Press and hold down the test button, while you plug the external

power supply back in. Continue to hold down the test button,

until the network indicator begins to flash at one second intervals.

This should take at least 5 seconds.

3. Release the test button and wait until the network indicator

flashes at least five times.

4. Press and hold the test button again until the network indicator

remains constantly lit.

5. Restart the AXIS 1620 by switching it off and on.

The AXIS 1620 is now reset to factory default settings.

Note: ❏ All parameters except Node Address (NODE_ADDR), Internet

Address (IP_ADDR) and DHCP enabled or disabled

(DHCP_ENABLE.) are reset. If you want to change the these

parameters, use either AXIS NetPilot or any standard Web

browser. Please refer to Section 9 Management & Configuration,

on page 99.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 162 163

Brak uwag

Axis 1620 Instrukcja Użytkownika Strona 144