Axis NPS 630 Instrukcja Użytkownika

EnglishAxis NPS 630/632Quick Installation GuideToken Ring Print Server for•NetWare•Windows•OS/2•Unixqi630eng.frm Page 10 Tuesday, November 14, 1995

AXIS COMMUNICATIONS AB,Scheelevägen 16, S-223 70 Lund, Sweden.Phone: +46 46 19 18 00. Fax: +46 46 13 61 30.Email: [email protected] URL: http://www.axis.se

Quick Installation GuideThis guide covers the installation and basic configuration procedures for the NetWare, Windows, OS/2, and Unix environments. F

NetWareThe procedure below applies to the NPS 630/632 Print Server Mode only and is recommended only if you have a small network with just a few file

WindowsThis section describes how to set up your NPS 630/632 for the Microsoft Windows printing environment. The NPS 630/632 setup for Windows compris

port name (you will need it later), then click OK to install the Windows port.5. In the Port menu, click Connect to bring up the Windows Printers dial

Windows NTFollow these steps to install an NPS 630/632 printer port as a Windows port, and to connect a printer driver:1. Double-click the Axis Print

OS/2The NetBEUI protocol must be active. If not, use MPTN/LAPS (LAN Server) or SETUP (LAN Manager) to activate it.Install the Axis Print Utility and y

accessed from other computers (clients or other servers). Open an OS/2 window and issue the following command:Queue_name is the queue created above.NE

UnixYou will need root privileges for the configuration.1. Find an unused Internet address (IP address) and choose a unique host name for your NPS 630