Axis AXIS P1357-E Przewodnik Instalacji Pobierz pdf (Strona 15)

AXIS P1355-E/P1357-E Installation Guide Page 15

ENGLISH

Unit connectors

Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded

cables is recommended.

Power connector - 2-pin connector block used for power input (not used).

Audio in - 3.5 mm input for a mono microphone, or a line-in mono signal (left

channel is used from a stereo signal).

Audio out - Audio output (line level) that can be connected to a public address (PA)

system or an active speaker with a built-in amplifier. A pair of headphones can also

be attached. A stereo connector must be used for the audio out.

SDHC memory card slot - A standard or high capacity SD memory (microSD) card can be used for

local recording with removable storage.

I/O terminal connector - Used in applications for e.g. motion

detection, event triggering, time lapse recording and alarm

notifications. In addition to an auxiliary power and a GND pin, it

provides the interface to:

• 1 digital output – For connecting external devices such

as relays and LEDs. Connected devices can be activated

by the VAPIX® Application Programming Interface (API),

by the output buttons on the Live View page or by an

Event Type. The output will show as active (shown under

System Options > Ports & Devices) if the alarm device is activated.

• 1 digital input – An alarm input for connecting devices that can toggle between an open

and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc.

When a signal is received the state changes and the input becomes active (shown under

System Options > Ports & Devices).

SD card slot (microSD)

Pin 3

Pin 4

Pin 2

Pin 1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 99 100

Brak uwag

Axis AXIS P1357-E Przewodnik Instalacji Strona 15