Axis AXIS P1357-E Przewodnik Instalacji Pobierz pdf (Strona 9)

AXIS P1355-E/P1357-E Installation Guide Page 9

ENGLISH

Route the network cable through the cable hole

1. Loosen the cable cover screws; detach the cable cover from the bottom cover.

2. Remove the cap, the plug and the gasket from the cable gland that is to be used.

3. Route the network cable through the cap.

4. Slide the network cable through the slit on the gasket to attach the gasket to the network

cable. See Unit connectors, on page 15 for information on network cable requirements.

5. Route the network cable through the cable gland.

6. Press the gasket into the cable gland and screw the cap on firmly.

Note:

Using any other than the provided cable gland may cause water to seep in and damage the

product. Cables must have a diameter of 4.0 mm - 5.5 mm.

Cable gland

Gasket

Plug (discard)

Cap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 99 100

Brak uwag

Axis AXIS P1357-E Przewodnik Instalacji Strona 9