Axis 7100 Przewodnik Instalacji Pobierz pdf (Strona 391)

100

101

ADT Model 7100 Semi-Automatic Dicing System Operations Manual

Cut Parameters

P/N 97100-9002-000-14 Ver 06/05

A-25

Cut

Cut Map Build

Direction

Defines the direction in which the Cut Map is built.

Possible Values:

Front to Back, Back to Front (default)

Cut Cut Map - X Shift

Defines an offset in the X direction for determining the

cut position used to draw the Cut Map.

Possible Values:

min = -200, max = 200, Default = 0

Cut Cut Map - Y Shift

Defines an offset in the Y direction for determining the

cut position used to draw the Cut Map.

Possible Values:

min = -200, max = 200, Default = 0

Cut Cut Type

The cutting direction.

Possible Values:

Normal (default): The direction of the Chuck during

cutting is from left to right.

Back: The direction of the Chuck during cutting is

from right to left.

Mixed: The direction of the Chuck during cutting

alternates after each cut.

Cut Cuts No.

The number of cuts. This parameter is relevant when

cutting using the Standard APC algorithm.

Possible Values:

min = 0, max = 9999, Default = 16

Cut Cutting Direction

Defines the cutting direction.

Possible Values:

Front to Back, Back to Front (default)

Cut Cutting Speed

The speed of the Cutting Chuck (mm/sec) in the X

direction during the cut. (In effect, this is the speed at

which the Blade moves through the Workpiece.) (See

Figure A-1.)

Possible Values:

min =.01, max = 300, Default = 10

Cut Depth

The distance along the Z-Axis between Chuck Level

and the cutting edge of the Blade in its cutting

position.

Possible Values:

min =.015, max = 30, Default =.045

Table A-9: Cut Parameters

Category Parameter Description

1 2 ... 386 387 388 389 390 391 392 393 394 395 396 ... 423 424

Komentarze do niniejszej Instrukcji

Brak uwag

Axis 7100 Przewodnik Instalacji Strona 391

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Serwery Axis 7100