Axis 670e Instrukcja Użytkownika Strona 29

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 301
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 28
Section 3: Basic Installation AXIS 570/670 User’s Manual
28
Windows
IBM Mainframe
IBM AS/400
UNIX
NetWare
OS/2
Macintosh
Connecting a printer to the Token Ring Network
Follow the instructions below to connect a printer to the network via
the AXIS 670/670e print server.
Caution! Make sure that the AXIS 670/670e external power supply is
marked with the correct voltage! Refer to the Power supply table
on page 15.
DO NOT connect or disconnect the network cabling while AXIS
670/670e is powered on.
1. Switch off the printer and disconnect the AXIS 670/670e external
power supply.
2. Locate the serial number, found on the underside label of the
AXIS 670/670e, and write it down. You will need this number
later during the network configuration.
3. Connect the printer to the LPT1, LPT2 or the COM1 port on
the AXIS 670/670e using an appropriate printer cable.
4. Slide the Ring Speed switch towards 4 or 16 depending on the
ring speed of your network.
5. Connect your AXIS 670/670e to the network using an Shielded
Twisted Pair (Media Type 1) or Unshielded Twisted Pair (Media
Type 3) cable.
6. Switch on the printer and connect the external power supply to
the AXIS 670/670e. The power indicator lights. If the network
indicator starts to flash, the AXIS 670/670e is successfully
connected to the network.
Przeglądanie stron 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 300 301

Komentarze do niniejszej Instrukcji

Brak uwag