Axis 670e Instrukcja Użytkownika Pobierz pdf (Strona 93)

Section 5: Setting Up - IBM Mainframe AXIS 570/670 User’s Manual

IBM Mainframe

❏ In the path definition, PATH DIALNO should be comprised

with its first two digits equal to the place holder, the next two set

to the SAP and the remaining twelve digits set to the AXIS

570/670 Ethernet or Node address. By default the Ethernet/Node

address is identical to the AXIS 570/670 serial number. A valid

GRPNM

must also be supplied.

❏ In the LU definition, the LOCADDR number maps to the Logical

Printer number of the AXIS 570/670. The first eight Local

Addresses pass the printout through Logical Printer 1-8.

However, some IBM systems do not allow Local Address 1 to be

used for printing. Refer to Section 12 - Using Logical Printers, on

page 193 for more information about logical printers.

Example (PU definition for an IBM 9370):

Path is not used for a locally attached 9370 Token Ring adapter.

Replace the PATH and PU definitions in the previous example

with the PU definition below.

Note: ❏ IDNUM should be set to the five last digits of the AXIS 670 node

ID. By default, this is the five last digits of the AXIS 670 serial

number. The last twelve digits of MACADDR should be set to the

AXIS 670 Node address. By default this is the AXIS 670 serial

number.

* PU definition for 9370

* E07nnnnn is the node ID set in AXIS 570/670.

* xxxxxxxx is the 8 last digits of the MAC address of

* the AXIS 570/670.

PU6701 PU IDBLK=E07, X

IDNUM=nnnnn, X

MACADDR=xxxxxxxxxxxx, X

SAPADDR=04

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 300 301

Brak uwag

Axis 670e Instrukcja Użytkownika Strona 93