Axis 670e Instrukcja Użytkownika Pobierz pdf (Strona 90)

AXIS 570/670 User’s Manual Section 5: Setting Up - IBM Mainframe

IBM Mainframe

Procedures

Important! ❏ When using a concentrator gateway between the host and your

print server, it is not necessary to define separate VTAM Major

Node and PU definitions for the AXIS 570/670. You will instead

be working with the gateway VTAM definitions. Since the AXIS

570/670 will appear to the host as one or several LU’s attached to

the gateway PU, you need only add LU definitions to the gateway

major node definition and then proceed to item 3 below.

1. Define a VTAM Major Node Definition where the Print

Server definitions will be placed. Using a channel attached 3174

as a gateway to the host, this definition is typically defined as a

Local Major Node. If you are using a remotely attached

gateway via a 37X5 communications controller or a LAN attached

3172, you will be working with a Switched Major Node

definition.

2. Add the Print Server PU and LU definitions to the major node

definition.

Note: For Switched Major Node definitions you need to:

3. Ensure that the corresponding VTAM Logon-mode entries are

available and that the appropriate LU session types (LU1 or LU3)

are used.

4. Vary ACTive the VTAM Major Node definition for the

AXIS 570/670.

•Add the IDBLK (default = E07) and IDNUM (default = last 5

digits of the 570/670 MAC address) entries to the PU

definition.

•Code a PATH definition using the unit’s full 12 digit MAC

address.

Example: An AXIS 670 with a MAC/node address of

000231B80937 will be defined as:

PA6701 PATH DIALNO=0104000231B80937, GID=1,

FID=1, GRPNM=gggggg

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 300 301

Brak uwag

Axis 670e Instrukcja Użytkownika Strona 90