Axis 950 Instrukcja Użytkownika Pobierz pdf (Strona 19)

Section 3: Network Configuration

AXIS 850/950 User’s Manual 19



• rarp – downloads the Internet address to each device

automatically. Requires a rarp daemon on your system and

operates within a single network segment only,

• bootp – similar to rarp, but operates on the entire network.

Requires a bootp daemon on your system.

Choose the method most suited to your needs. If needed, the rarp and

bootp methods can be disabled by editing the

RARPEnable and

BOOTPEnable parameters as described in section 5.

Set the Internet

Address Using the arp

Method

Perform the following commands to down-load the Internet address

and verify the communication (the Ethernet address or node address

equals the serial number found at the back of the Axis CD-ROM

server with each pair of digits separated by a colon, see example

below):

Example:

The host will return ‘

cdserv is alive

’ or similar indicating that the

address has been set, and that communication is established.

Notes: ❏ The

arp -s command may vary between different systems. Some

BSD-type systems expect the host name and Ethernet address in

reverse order. IBM AIX systems require the additional argument

ether for Ethernet networks (e.g. arp -s ether salesdept

00:40:8c:11:00:86 temp

) and 802.5 for Token Ring networks

(e.g.

arp -s 802.5 salesdept 00:40:8c:11:00:86 temp).

❏ When you execute the ping command for the first time you

should expect a response time significantly longer than usual.

arp -s <host name> <Ethernet or node address> temp

ping <host name>

arp -s cdserv 00:40:8c:11:00:86 temp

ping cdserv

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 68 69

Brak uwag

Axis 950 Instrukcja Użytkownika Strona 19