Axis BTA 2100D Instrukcja Operatora Pobierz pdf (Strona 281)

100

101

279

You can use a split ratio of 100 after injection to vent the injector of any residual

solvent.

Use a very low split ratio after flushing to conserve carrier gas.

The first row of the spreadsheet contains the Initial Split State and Split Ratio for

the 1177 injector. The 1177 will equilibrate to this setting when the method is

activated, and will be restored to this setting when each chromatographic run is

completed.

Rows after the first row of the spreadsheet contain the time-programmed settings

for the 1177 Split Ratio. The Split Valve will be switched to the ratio in each row

at the indicated time.

1041 Injector

If you indicate that a 1041 Injector is installed, an Oven Power switch and a

Temperature setting will appear.

Indicate whether or not you will use the installed 1041 Injector by clicking on the “On”

or “Off” radio buttons.If you indicate that a 1041 Injector is to be turned on, select the

desired Temperature setting.

1061 Injector

If you indicate that a 1061 Injector is installed, an Oven Power switch and a

Temperature setting will appear.

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 596 597

Komentarze do niniejszej Instrukcji

Brak uwag

Axis BTA 2100D Instrukcja Operatora Strona 281

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Axis BTA 2100D