Axis BTA 2100D Instrukcja Operatora Pobierz pdf (Strona 86)

100

101

On the left side of the dialog box is an progress bar that indicates the relative

amount of AIR in the system. A message is displayed below the bar.

If the display reads OK, there is essentially no air leak in the system. If the

message MAYBE is displayed, there is a small air leak. The system can be

operated, but performance might not be optimum.

If the display reads HIGH, there is a significant air leak. The leak must be found

and corrected before the system can be operated.

On the right side of the dialog box is an progress bar that indicates the relative

amount of WATER in the system. A message is displayed below the bar.

If the meter reads OK, there is very little water in the system and the system can

be operated.

If the display reads MAYBE, there is a small amount of water, and the system

can be operated, but performance might not be optimum. If the meter reads

HIGH, there is a comparatively large amount of water present in the system, and

the system must be bake out to remove the water before the system can be

operated. (A relatively high water background is generally observed immediately

after you have vented the instrument. It will usually go away within a few hours of

restoring the instrument to its normal operating conditions.)

NOTE: The Air/Water Check uses the electron multiplier voltage giving a 10

gain and not the manual setting. If the electron multiplier is replaced. The

autotune of Electron Multiplier Tune must be done before the Air/Water Check.

Electron Multiplier Tune

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 596 597

Komentarze do niniejszej Instrukcji

Brak uwag

Axis BTA 2100D Instrukcja Operatora Strona 86

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Axis BTA 2100D