Axis BTA 2100D Instrukcja Operatora Pobierz pdf (Strona 45)

100

101

Elements of the Configuration Screen

After the 3800 or 3900 connects to System Control, configure it in an Instrument

by moving its icon from the bottom of the Configuration Window into the

Instrument Area. System Control will remember where to put the icon the next

time that the 3800 connects.

If the 3800 is to be operated with an 8200, make the 8200 the AutoControl

Module. Place the GC icon in the AutoControl Module if either a CP-8400 or CP-

8410 AutoSampler will be used with the GC. If the 3800 or 3900 is to be

operated without an AutoSampler controlled from the Varian MS Workstation,

leave the AutoControl Module box empty. If you are using a sampling device with

the 3800, the device must be connected to the synchronization port of the GC.

The Varian MS is usually configured into 2 modules, the 2000 and the GC.

Additionally, an 8200 AutoSampler can also be part of the system. After each

module connects to System Control, configure it in an Instrument by moving its

icon from the bottom of the Configuration Window into the Instrument Areas.

System Control will remember where to put the icon the next time that the system

connects.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 596 597

Komentarze do niniejszej Instrukcji

Brak uwag

Axis BTA 2100D Instrukcja Operatora Strona 45

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Axis BTA 2100D